??? WRET-01, WRNT-01 presses the reed type thermo-element through to press the reed the thermo-element nose with to measure the surface clings, enhances the survey the reliability and the accuracy. Presses the reed type thermo-element and the display instrument and so on necessary use, but in direct measurement 0~400¡æ scope temperature. Presses the reed type thermo-element to have the soft extension wire, may the free bend, have the hot response time to be small, characteristics and so on easy to operate, are suitable for industries and so on plastic extruding machine, light industry, food.
| * structure principle |
| WRET-01 presses the reed type thermo-element the mechanism, the indexing characteristic and the allowable deviation, the reference end (cold junction) the temperature compensation, as well as with |
| The demonstration measuring instrument's joint method and the general thermo-element is the same. |
| WRET-01 presses the reed type thermo-element the structure like chart to show, by the tube protector, the erection bolt. Locking sleeve chuck, compositions and so on spring and thermo-element wire. |
|
| * installs the method |
| WRET-01 presses the reed type thermo-element to install the method like chart, shows, installs fixedly, in is measured above the object, the connecting bolt will screw tight first in was measured |
| On the object, clings again the thermo-element is measured the thing, screws tight the sleeve chuck bolt, finally twists locks the sleeve chuck. |
|
| * model specification |
Model |
Indexing number |
Temperature measurement scope ¡æ |
Hot response time t0.5s |
Tube protector material |
WRET-01 |
E (EA-2) * |
0-400 |
<5 |
Stainless steel 1Cr18Ni9Ti |
WRNT-01 |
K (EU-2) * |
0-400 |
<5 |
Stainless steel 1Cr18Ni9Ti |
Specification |
Connecting bolt mm |
Total length Lmm |
Tube protector l mm |
1000
1500
2000
2500
3000
3500
4000
|
30
30
30
30
30
30
30
|
35 or 70
|
1000
1500
2000
2500
3000
3500
4000
|
60
60
60
60
60
60
60
|
|
|
|
|
|
|
Note: Ordering must write plainly: 1) product range and model
2) the sum total sets at the depth
3) the indexing number hits ¡°*¡± expression special specification ordering |
|
